销售热线:4008893989
最新产品
CL-6621-X防水鞋袜套烘干机器型录 ..
CL-667N2L自动急速冷冻定型机机器型录 ..
CL-667N3L自动急速冷冻定型机机器型录 ..
CL-7635QZD新型全自动蒸汽鞋面软化机 ..
成型定型设备系列
双边双向NIR红外线双层贴底生产线
单价:0
发布时间:2016-09-03 12:41:31
浏览量:1437
最小起订:1 0
最大供货:10000 0
4点击查看
详细信息
相关评论
注意事项
CL-639AL-CPLC 双边双向NIR红外线双层贴底生产线
 
CL-639AL-CPLC  DOUBLE-LAYER AND DOUBLE-SIDE INFRARED CONTROL SOLE ATTACHING PRODUCTION
 
 LINE (FILTER EXHAUST FAN WITH ACTIVATED CARBON )
 
1、利用高效近红外线灯管原理,配合热风循环系统,可快速稳定烘干胶水,是一种高效的制鞋贴底烘干线。
2、该线为双边双向型设计,即左右两侧的输送装置为独立运转控制,可调置鞋架与上层皮带均可左右正反
      独立运转,箱体也为左右独立设计,左右加热,互不影响,作业中依据实际需要可单独打开一边即可。
3、采用精密SCR控制器配合数字温度控制系统,大底、鞋面烘箱采用独立温度,依不同鞋材材质设定温度,温
      度恒定精确,贴合效果更佳。
4、采用特殊进口又低炫光红外线灯管,不伤眼睛,不需预热,通过直接利用红外线灯管的辐射加热方式,随
      机开启约2分钟即可快速达到设定温度。
5、采用PLC控制,人机界面操作,配置摄像头,智能化系统控制,可整机对接工业4.0;
6、各工位刷胶作业区,均配置有活性炭抽风机。可对于作业中产生的胶味收集,过滤处理,净化作业环境。
7、各段箱体温度数据,温度曲线,运转速度,产能均以数字化显示设定。
8、各段箱体均独立配置超温保护装置,更确保安全,产品品质更稳定。
 
1. Based on the principle of effective NIR lamp and coordinated with hot air recycling system, it can dry the glue rapidly
   and stably, it is a highly effective drying line for sole attaching .
2. This production line is designed to be bilateral and bidirectional, namely, the conveying equipments on left and right
   are controlled separately, the adjustable shoe rack and the upper belt can operate separately forward ,backward, left
   and right in direction. The oven body is also designed to allow a separate heating on left and right, without any impacts
   on each other. You can open a single side in accordance to actual need in operation.
3. Coordinating with digital temperature control system, the precise SCR controller is adopted, the oven of outsole and
   upper lasted set independent different temperature based on different texture of shoe, the temperature is constant
   and precise which facilitate the lamination. 
4. Special imported infrared light tub with low glare, which does not do harm to eyes, and need not to preheat either, it
   is heated directly by the radiation of the infrared light tub, about 2 minutes after the machine is turned on, the
   temperature set will be soon reached. 
5. PLC control and human-computer interface operation are adopted together with camera and intelligent system
   control, which can be connected to the requirements of Industry 4.0.
6. Each work place is equipped with activated carbon exhaust fans which can absorb the gas produced by glue, filter and
   purify the working environment.  
7. Each section oven of the inner temperature, temperature curve, run speed and actual production output are displayed
   and operated in the digital interface, also, the machine is designed to inspect and remind automatically for a malfunction.
8. To ensure shoe quality best, each section oven of the machine provides independent functions of over temperature
   protection and appropriate alarm lamp.

添加评论
称  呼:
验 证 码:
内  容:




掌柜提示:


购买多件发同一个地址的
请务必使用购物车。
运费模板是自动按件数累加邮费,并非实际邮费!
使用购物车拍下后,我们客服会按实际邮费修改!